Menu Blob The blob that grows to be the menu background
Skip to toolbar
Product banner

Matrix B12

The robustness and reliability of the entire system provide the peace of mind needed for effective healthcare delivery. The therapeutic features of Matrix B12, combined with advanced positioning, provide high quality interventions for bariatric patients.

Positions

Examination

Shock

CPR

Cardiac Chair

Features

INCLUSIVE HEALTH

Bariatric Bed

Matrix B12 was created as a solution to assist in the care of patients with morbid obesity. Focused on the inclusion of patients exceeding the maximum load of standard hospital beds, this is a key bed to complement any healthcare facility.

With pre-defined medical positions, safety features and tools to reduce hospitalisation times, it becomes a bed that fulfils the therapeutic requirements of most patients and an indispensable tool for healthcare professionals.

Robust Architecture

Reinforced structure in key points and lifting system by trapezoidal arms electrically articulated by 2 linear motors Linak brand.

Lifting stroke of 420-715 mm and maximum patient load of 400 Kg.

PORTABLE CONTROLS

Supervisor Control

Located at the foot of the bed and recessed into the bed foot panel. Selective locks as protection against misuse. Powered by helical cable.

The supervisor control enables Trendelenburg, Cardiac Chair and Exam medical positions to be performed, as well as CPR and Shock emergency interventions.

Hand-held Control

Highly shock resistant. Powered by helical cable.

The hand-held control allows you to perform the medical positions of Reversed Trendelenburg, Cardiac Chair, Examination and Rest.

EFFECTIVE PROCEDURES

Medical Positions

Matrix B12 is equipped with advanced bed positioning functions, performing complex and precise movements with the push of a button.

It also incorporates features that facilitate and speed up the provision of care, with alarms and stops at key angles the horizontality of the bed.

Differentiating Accessories

Matrix B12 includes the option of incorporating accessories and extras important for various areas of healthcare for bedridden patients.

EARLY MOBILITY

Pressure Ulcer Prevention

The articulation of the mattress platform (back + legs) causes harmful muscular pressure in the abdominal and lumbar areas.

By lifting the articulations, they simultaneously perform a synchronous gliding. This self-regression of the back and leg articulations causes decompression and relief of the sacroiliac area, usually a critical point in the development of pressure ulcers.

Self-Confidence

An important factor in reducing the length of hospital stays is the recovery of the patient’s confidence in their motor skills. The bed has features designed to help in this task, which helps to sit without fear of slipping or hurting oneself, or to stop the elevation of the bed when the patient leaves.

A bed designed to improve the patient’s autonomy, giving him/her control of functions such as the Cardiac Chair position to improve the practice of activities and meals or the Rest position for periods of safe sleep.

INFECTION CONTROL

Hygiene Components

The headboard and foot panels are made entirely of washable materials, in particular the stainless steel handrail, a material with great capacity for cleaning and disinfection, durability and high resistance to impact. The panels are vertically removable.

The bed board is made up of 4 modular components in phenolic (high pressure thermolaminate). All components are removable for cleaning.

Total Disinfection

The design of the bed was conceived in order to facilitate the cleaning processes. Reducing dirt accumulation points as much as possible.

CONTINUOUS PROTECTION

Fall Prevention

The side guard rails meet the EN 60601-2-52 standard through components with adequate spaces to avoid entrapment of body parts for patients and caregivers. A high vertical cover and wide opening at the foot of the bed prevent the risk of injuries caused by accidental falls and prevent patients from stepping over the guard rails in disorientation episodes.

Selective Lock

The electrical functions of the bed can be selectively deactivated for reasons of functional convenience or safeguarding the patient’s health. The exception being emergency functions, which are not affected by Selective Lock.

Locks are available in the supervisor control. They are indicated by a padlock, blocking all motors that the selected function activates.

URGENT ACTION

Emergency Procedures

Emergency functions such as CPR and Shock are not affected by Selective Lock functions, allowing rapid intervention in any situation.

On the supervisor’s remote control, patients in cardiac arrest or hypovolaemic shock can be helped with the press of a single key.

ERGONOMICS AND ADAPTATION

Vascular Position

The height of the foot section is adjustable point by point by a rack for manual use.

In synchronicity with Auto Contour and Trendelenburg, it can improve circulation of blood to the heart, a necessary procedure in reducing the risk of hypovolemic shock and after some vascular surgeries.

360° Protection

The corners of the bed are equipped with shock-absorbing discs and fairings with ABS protections.

The wheel carriers are also ABS-faired.

SAFE TRANSPORT

TENTE Wheels

High-quality German brand Tente wheels, Ø150 mm, double-band ABS-faired, with high load capacity.

Centralised Braking

Bed equipped with 2 brake pedals, at the rear corners of the bed, with centralised effect and directional lock.

SMOOTH MOVEMENT

Cable Clip

Power cables damaged by transport is one of the most frequent malfunctions in electric hospital beds.

Matrix B12 is equipped with a convenient portable cable holder to fit on top of the head panel in addition to the reel fixed to the snap-in frame of the same head panel.

Batteries

1.2A/h battery module to keep the bed operational when disconnected from the power supply.

When plugged in, it electronically manages the charging process, making it unnecessary to unplug the power socket once the batteries are charged.

INCLUSIVE HEALTH

Bariatric Bed

Matrix B12 was created as a solution to assist in the care of patients with morbid obesity. Focused on the inclusion of patients exceeding the maximum load of standard hospital beds, this is a key bed to complement any healthcare facility.

With pre-defined medical positions, safety features and tools to reduce hospitalisation times, it becomes a bed that fulfils the therapeutic requirements of most patients and an indispensable tool for healthcare professionals.

Robust Architecture

Reinforced structure in key points and lifting system by trapezoidal arms electrically articulated by 2 linear motors Linak brand.

Lifting stroke of 420-715 mm and maximum patient load of 400 Kg.

PORTABLE CONTROLS

Supervisor Control

Located at the foot of the bed and recessed into the bed foot panel. Selective locks as protection against misuse. Powered by helical cable.

The supervisor control enables Trendelenburg, Cardiac Chair and Exam medical positions to be performed, as well as CPR and Shock emergency interventions.

Hand-held Control

Highly shock resistant. Powered by helical cable.

The hand-held control allows you to perform the medical positions of Reversed Trendelenburg, Cardiac Chair, Examination and Rest.

EFFECTIVE PROCEDURES

Medical Positions

Matrix B12 is equipped with advanced bed positioning functions, performing complex and precise movements with the push of a button.

It also incorporates features that facilitate and speed up the provision of care, with alarms and stops at key angles the horizontality of the bed.

Differentiating Accessories

Matrix B12 includes the option of incorporating accessories and extras important for various areas of healthcare for bedridden patients.

EARLY MOBILITY

Pressure Ulcer Prevention

The articulation of the mattress platform (back + legs) causes harmful muscular pressure in the abdominal and lumbar areas.

By lifting the articulations, they simultaneously perform a synchronous gliding. This self-regression of the back and leg articulations causes decompression and relief of the sacroiliac area, usually a critical point in the development of pressure ulcers.

Self-Confidence

An important factor in reducing the length of hospital stays is the recovery of the patient’s confidence in their motor skills. The bed has features designed to help in this task, which helps to sit without fear of slipping or hurting oneself, or to stop the elevation of the bed when the patient leaves.

A bed designed to improve the patient’s autonomy, giving him/her control of functions such as the Cardiac Chair position to improve the practice of activities and meals or the Rest position for periods of safe sleep.

INFECTION CONTROL

Hygiene Components

The headboard and foot panels are made entirely of washable materials, in particular the stainless steel handrail, a material with great capacity for cleaning and disinfection, durability and high resistance to impact. The panels are vertically removable.

The bed board is made up of 4 modular components in phenolic (high pressure thermolaminate). All components are removable for cleaning.

Total Disinfection

The design of the bed was conceived in order to facilitate the cleaning processes. Reducing dirt accumulation points as much as possible.

CONTINUOUS PROTECTION

Fall Prevention

The side guard rails meet the EN 60601-2-52 standard through components with adequate spaces to avoid entrapment of body parts for patients and caregivers. A high vertical cover and wide opening at the foot of the bed prevent the risk of injuries caused by accidental falls and prevent patients from stepping over the guard rails in disorientation episodes.

Selective Lock

The electrical functions of the bed can be selectively deactivated for reasons of functional convenience or safeguarding the patient’s health. The exception being emergency functions, which are not affected by Selective Lock.

Locks are available in the supervisor control. They are indicated by a padlock, blocking all motors that the selected function activates.

URGENT ACTION

Emergency Procedures

Emergency functions such as CPR and Shock are not affected by Selective Lock functions, allowing rapid intervention in any situation.

On the supervisor’s remote control, patients in cardiac arrest or hypovolaemic shock can be helped with the press of a single key.

ERGONOMICS AND ADAPTATION

Vascular Position

The height of the foot section is adjustable point by point by a rack for manual use.

In synchronicity with Auto Contour and Trendelenburg, it can improve circulation of blood to the heart, a necessary procedure in reducing the risk of hypovolemic shock and after some vascular surgeries.

360° Protection

The corners of the bed are equipped with shock-absorbing discs and fairings with ABS protections.

The wheel carriers are also ABS-faired.

SAFE TRANSPORT

TENTE Wheels

High-quality German brand Tente wheels, Ø150 mm, double-band ABS-faired, with high load capacity.

Centralised Braking

Bed equipped with 2 brake pedals, at the rear corners of the bed, with centralised effect and directional lock.

SMOOTH MOVEMENT

Cable Clip

Power cables damaged by transport is one of the most frequent malfunctions in electric hospital beds.

Matrix B12 is equipped with a convenient portable cable holder to fit on top of the head panel in addition to the reel fixed to the snap-in frame of the same head panel.

Batteries

1.2A/h battery module to keep the bed operational when disconnected from the power supply.

When plugged in, it electronically manages the charging process, making it unnecessary to unplug the power socket once the batteries are charged.

Extras and Accessories

Acessórios

IV Support

Telescopic pole adjustable in height and rotation, removable and fitting on both sides of the bed. Four hooks for hanging bags for intravenous administration.

Lifting Trapezium

Patient suspension support with stainless steel column, removable, fitting on both sides of the bed. Handle in polyamide with nylon extension belt adjustable by button.

Urinal Holder

Support for urinal up to 1l in stainless steel. Adjustable and removable, fits on both sides of the bed.

O2 Bottle Holder

Adjustable holder for one oxygen bottle. Completely stainless steel, removable, fitting on both sides of the bed.

Writing Desk

Writing tabletop in phenolic (high pressure thermolaminate), removable and foldable. It is adapted to the footboard, by the hooks integrated into the structure.

Technical Specifications

Recommended Mattress 1950 x 1060 x 150 mm

External Dimensions 2120 x 1200 mm

Minimum/Maximum Height 420 / 720 mm

*Dependent on the configuration chosen

Maximum back angle 60º

Maximum leg angle 35º

Maximum foot angle 20º

Cardiac Chair 85º

Maximum angle Trendelenburg 15º Trend. Invertida 15º

Maximum patient load 400 kg

Electrical voltage 100-240 VAC, 50/60 Hz

Maximum power 390 VA

Battery charge 18 W

Electrical Protection Class 1 applied parts type B

Would you like to get more information?

Contact Us!






A copy will be sent to your email